|
|
accept-lifetime
start-time{infinite|end-time|duration
seconds}
|
Specifies the time period during which the authentication key on a key chain is received as valid.
|
|
auto-summary
|
Enables automatic summarization at network boundaries. This command is enabled by default.
|
|
bandwidth
kilobits
|
Specifies the bandwidth parameter, in kilobits per second, on an interface.
|
|
debug eigrp packets
|
Displays EIGRP packet activity.
|
|
debug ip eigrp neighbor
process-id address
|
Adds a filter to the debug eigrp packets command, telling it to display only IP packets for the indicated process and neighbor.
|
|
delay
tens-of-microseconds
|
Specifies the delay parameter, in tens of microseconds, on an interface.
|
|
ip authentication key-chain eigrp
process-id key-chain
|
Configures a key chain on an EIGRP interface and specifies the name of the key chain to be used.
|
|
ip authentication mode eigrp
process-id
md5
|
Enables EIGRP authentication on an interface.
|
|
ip bandwidth-percent eigrp
process-id percent
|
Configures the percentage of bandwidth used by EIGRP; the default is 50%.
|
|
ip hello-interval eigrp
process-id seconds
|
Configures the EIGRP hello interval.
|
|
ip hold-time eigrp
process-id seconds
|
Configures the EIGRP hold time.
|
|
ip summary-address eigrp
process-id address mask
|
Configures a router to send a summary EIGRP advertisement.
|
|
key
number
|
Specifies a key on a key chain.
|
|
key chain
name-of-chain
|
Specifies a group of authentication keys.
|
|
key-string
text
|
Specifies the authentication string, or password, used by a key.
|
|
metric weights
tos k1 k2 k3 k4 k5
|
Specifies how much weight the bandwidth, load, delay, and reliability parameters should be given in the IGRP and EIGRP metric calculations.
|
|
network
network-number
|
Specifies the network address of one or more interfaces on which IGRP, EIGRP, or RIP processes should be enabled.
|
|
passive-interface
type number
|
Disables the transmission of broadcast or multicast routing updates on an interface.
|
|
router eigrp
process-id
|
Enables an EIGRP process.
|
|
send-lifetime
start-time {infinite|end-time|duration
seconds}
|
Specifies the time period during which the authentication key on a key chain may be sent.
|
|
show ip eigrp neighbors [type number]
|
Displays the EIGRP neighbor table.
|
|
show ip eigrp topology [process-id|[[ip address]mask]]
|
Displays the EIGRP topology table.
|
|
timers active-time {minutes|disabled}
|
Changes or disables the default 3-minute active time.
|
|
traffic-share {balanced|min}
|
Specifies whether an IGRP or EIGRP routing process should use unequal-cost load-balancing or equal-cost load balancing only.
|
|
variance
multiplier
|
Specifies a route multiplier by which a route metric can vary from the lowest-cost metric and still be included in an unequal-cost load-balancing group.
|
