Table 4-4. Command Summary
|
| clear ip nat translations {* | [inside [tcp {inside [global-ip [global-port] local-ip [local-port]} | udp {inside[global-ip [global-port] local-ip [local-port]}] | [inside global-ip local-ip][outside local-ip global-ip]
| Clears dynamic entries from the NAT table.
|
| ip nat {inside | outside}
| Designates the inside and outside interfaces; traffic originating from or destined for the interface is examined by the NAT.
|
| ip nat inside destination list {access-list-number|name} pool name
| Enables translation of inside destination addresses.
|
| ip nat inside source {list {access-list-number|name} pool name [overload] | static local-ip global-ip}
| Enables translation of inside source addresses.
|
| ip nat outside source {list {access-list-number|name} pool name | static global-ip local-ip}
| Enables translation of outside source addresses.
|
| ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length} type {rotary | match-host}
| Defines a pool of addresses to be used for address translation.
|
| ip nat translation max-entries entries
| Sets a limit on the number of entries allowed in the NAT table.
|
| ip nat translation {timeout | udp-timeout | dns-timeout | tcp-timeout | finrst-timeout | icmp-timeout | syn-timeout | port-timeout{tcp | udp}} seconds
| Changes the default period after which a dynamic entry is removed from the NAT table and the address is returned to the pool.
|
| show ip nat statistics
| Displays NAT statistics.
|
| show ip nat translations [verbose]
| Displays the NAT table.
|
